Galvanized Coating Steel Pipe
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Metric Ton |
Transportation: | Ocean |
Port: | Tianjin,China |
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Metric Ton |
Transportation: | Ocean |
Port: | Tianjin,China |
Brand: hydrogrand
Section Shape: Round
Place Of Origin: China
Tolerance: ±10%
Category: Seamless Steel Pipe, Welded Steel Pipe, Square tubes
Size: Outside diameter:Round pipe: 17mm-273mm
Length: 2m-5.8m/6m/12m ( We can adjust length according to your request)
Zinc Coating: 120~500 g/m2 (3oum~7oum)
Packing: steel Strips bundled,Plastic Caps plugged,Waterproof Paper wrapped etc.
Selling Units | : | Metric Ton |
Package Type | : | steel Strips bundled,Plastic Caps plugged,Waterproof Paper wrapped etc. |
Galvanized Coating Steel Pipe
size:Outside diameter:Round pipe: 17mm-273mm
square pipe:15mm x 15mm - 400mm x 400mmRectangular pipe: 10mm x 20mm -200mm x 400mmwall thickness:
Round pipe: 0.6mm-12mmsquare pipe:0.6mm-20mmRectangular pipe: 0.6mm-20mm
Length:2m-5.8m/6m/12m ( We can adjust length according to your request)
Zinc Coating: 120~500 g/m2 (3oum~7oum)
Packing:steel Strips bundled,Plastic Caps plugged,Waterproof Paper wrapped etc.
Galvanized Steel Pipe(Seamless Pipe and welded pipe) are commonly used in a wide range of applications, including plumbing, heating and cooling systems, electrical conduit, and structural support.
Zinc Coating:
Pre-galvanized steel pipe:60-150g/m2
hot dipped galvanized steel pipe:200-460g/m2
Surface treatment:Cold galvanizing. Hot-dipped galvanized
ASTM Standards
1.ASTM A123/A123M: Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products Single pieces of steel or fabrications with different types of steel products
2.ASTM A153/A153M: Standard Specification for Zinc Coating (Hot-Dip) on Iron and Hardware Fasteners and small products that are centrifuged after galvanizing to remove excess zinc
3.ASTM A767/A767M: Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement Reinforcing steel or rebar
Other Galvanizing Standards
1.CSA G164: Hot-Dip Galvanizing of Irregularly Shaped Article (Note: The scope of this standard was revised in 2018 to include products intended or primarily for use in electrical and communication systems only.)
2.ISO 1461: Hot-Dip Galvanized Coatings on Fabricated Iron and Steel Assemblies Specifications and Test Methods
3.AASHTO M111 (ASTM A123): Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
AASHTO M232 (ASTM A153): Zinc Coating (Hot-Dip) on Iron and Steel Hardware
Regulation | grid OD | Wall thickness mm | Minimum wall |
Nominal inner diameter | inch mm | | Thick mm |
DN15 | 1/2 21.3 | 2.8 | 2.45 |
DN20 | 3/4 26.9 | 2.8 | 2.45 |
DN25 | 1 33.7 | 3.2 | 2.8 |
DN32 | 1.25 42.4 | 3.5 | 3.06 |
DN40 | 1.5 48.3 | 3.5 | 3.06 |
DN50 | 2 60.3 | 3.8 | 3.325 |
DN65 | 2.5 76.1 | 4 | 3.5 |
DN80 | 3 88.9 | 4 | |
DN100 | 4 114.3 | 4 | |
DN125 | 5 140 | 4.5 | |
DN150 | 6 168.3 | 4.5 | |
DN200 | 8 219.1 | 6 (welded pipe) | |
DN200 | 8 219.1 | 6.5 hot-dip galvanizing | |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.