3LPE Coating Steel Pipe

Pipe type :3LPE Coating Seamless Steel Pipe,3LPE Coating ERW Steel Pipe,3LPE Coating LSAW Steel Pipe,3LPE Coating SSAW Steel Pipe,

Size :

OD:60mm ~ 3000mm

WT: 2.77mm ~ 100mm,

Length: 6mtr-18mtr

Standard :

DIN30670, DIN30671, DIN30678, AWWA C210, AWWA C213A-02, CAN / CSA-Z245, NF A49-710, AS/ NZS 3862:2002, IPS-G-TP-335, ISO21809-1:2011, GB /T 23257-229, SY/T 0315-2005, CJ/T120-2008; SY/T 0447-2014., etc.

Ends :Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends

Coating :3PE,Three polyethylene Layer

There are three layers in this pipe coating structure

● The first one: Epoxy layer (Thickness > 100um)

● The second one: Adhesive layer (Thickness: 170um~250um

● The third one: Polyethylene layer (Thickness: 1.8~3.7mm)What kind of pipes could be coated with 3PE or FBE

Standard of Anti-corrosion Pipe

1.ANSI*/AWWA C203—Coal-Tar Protective Coatings and Linings for Steel Water Pipe.

2.ANSI/AWWA C205—Cement-Mortar Protective Lining and Coating for Steel Water Pipe——4 In. (100 mm) and Larger——Shop Applied.

3.ANSI/AWWA C208—Dimensions for Fabricated Steel Water Pipe Fittings.

4.ANSI/AWWA C209—Cold-Applied Tape Coatings for Steel Water Pipe, Special Sections,Connections,and Fittings.

5.ANSI/AWWA C210—Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings.

6.ANSI/AWWA C213—Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and Fittings.

7.ANSI/AWWA C214—Tape Coatings for Steel Water Pipe.

8.ANSI/AWWA C215—Extruded Polyolefin Coatings for Steel Water Pipe.

9.ANSI/AWWA C216—Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water Pipe and Fittings.

10.ANSI/AWWA C217—Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings.

11.ANSI/AWWA C218—Liquid Coating Systems for Aboveground Steel Water Pipe and Fittings.

12.ANSI/AWWA C222—Polyurethane Coatings and Linings for Steel Water Pipe and Fittings.

13.ANSI/AWWA C224—Nylon-11-Based Polyamide Coatings and Linings for Steel Water Pipe Fittings.

14.ANSI/AWWA C225—Fused Polyolefin Coatings for Steel Water Pipe. ANSI/AWWA C229—Fusion-Bonded Polyethylene Coatings for Steel Water Pipe and Fittings.

15.ANSI/AWWA C602—Cement-Mortar Lining of Water Pipelines in Place———4 In.(100 mm) and Larger.

16.DIN3067—Polyethylene coatings of steel pipes and fittings —requirements and testing.

17.DIN30671—Thermoset plastic coatings for buried steel pipes

18.DIN3067—Coatings of corrosion protection tapes& heat shrinkable material for underground pipelines

19.DIN30678—Polypropylene coatings for steel pipes

20.DIN2614—Cement motar linings for ductile iron and steel pipes and fittings—application,requirements and testing

21.NF A49-710—Steel tubes.External coating with three polyethylene based coating.

22.NF A49-704—Polyethelene outer coating

23.AS1281—Cement mortar lining of steel pipes and fittings

24.NFA49-705—Steel tubes. External polyethylene coating. Application by powder sintering

25.AS1518—Extruded high density polyethylene protective coating for pipes

26.CAN/CSA-Z245.20—External Fusion Bond Epoxy Coating for Steel Pipe

27.BS EN10290-2002—Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings